Show
Of 260 Products found
-
New
RIDGID JobMax 1-1/8 In. Wood Plunge Cut Blade
A24JM02
NO FURTHER DISCOUNTS
- Fits most multi-tools
- Ideal for cutting holes for outlet boxes and floor heater vents
- 1-1/2 in. plunge cut capacity
- Blade is made from high-carbon steel for enhanced durability
- Blade can be used for cutting wood flooring, trim and other wood cutting applications
$7.50
-
New
RYOBI 5 In. 20 TPI Regular Pinned Scroll Saw Blade 4 Piece Set
A28SC51
NO FURTHER DISCOUNTS
- 4-piece regular tooth scroll saw blades (20 teeth per in.) designed for general purpose cutting in wood and plastic
- Made of high carbon steel for added durability
- For use with all scroll saws that take 5 in. pinned blades
- All blades are pinned end to accommodate wide range of scroll saws
- Cuts a variety of materials including thick wood
$1.26
-
Factory Blemished
RYOBI ONE+ 18 Volt Hybrid Drain Auger
P4002
NO FURTHER DISCOUNTS
- Included AC power supply
- Quick-change replaceable drum capable
- Replaceable tip mechanism to maximize cable life
- Innovative chuck design for ultimate control
- Clears clogs with ease from drains up to 2 in. W, including sinks and bath tubs
- 25 ft. reinforced cable to minimize kinking
- On-board rear drain port prevents water build up in the drum
- Stabilizing feet to keep rotating drum off delicate surfaces
$149.99
-
New
RYOBI 1/2 In. X 1/4 In. Buffing Arbor Adaptor
A10AA11
NO FURTHER DISCOUNTS
- Use with Ryobi buffing wheels
- Designed to connect your buffing wheel to your drill
- Helps adapt 1/2 in. arbor buffing wheels to drills
- Constructed of metal to maximize life
- Reversed shaft threads
$1.00
-
New
RYOBI 5/8 In. High Speed Steel Countersink
A10CS82
- Requires minimum chuck size of 1/4 in.
- Works with the Ryobi SpeedLoad plus chuck (not included)
- Ideal for setting screws into wood, metal and plastic
- High-speed steel for strength
- Quick and easy changes thanks to the SpeedLoad plus system
$2.00
-
New
RYOBI SpeedLoad+ 3/4 In. Countersink
A10CS92
NO FURTHER DISCOUNTS
- Requires minimum chuck size of 1/4 in.
- Constructed out of high-speed steel
- 5 cutting edges to reduce burrs and roughness
$4.50
-
Factory Blemished
RYOBI ONE+ 18 Volt Hybrid Transfer Pump
P750
NO FURTHER DISCOUNTS
- Transfers up to 325 Gal. per hour
- Up to 200 Gal. pumped with ONE+ 4.0 Ah battery (not included)
- Runs on 18-Volt battery or electric power with an extension cord
- Ergonomic handle for easy transportation
- Portable design with water resistant battery cover
$99.99
-
New
RIDGID JobMax 1-1/8 In. Multi-Purpose Steel Plunge Cut Blade
A24JM01
NO FURTHER DISCOUNTS
- Designed to fit most multi-tools
- Ideal for cutting holes for outlet boxes and floor heater vents
- Cuts material up to 1-1/2 in. thick
- Steel construction with a high-speed design
- Works great for cutting wood floors, nails and trim work
$8.50
-
New
RYOBI Hard Metal Compound 3 Piece Set
A04HM11
NO FURTHER DISCOUNTS
- 3 compounds help clean stainless, iron and steel surfaces
- Emery compound helps clean hard metals
- Stainless-steel compound helps clean various metals
$2.39
-
Factory Blemished
RIDGID Gen5X 18 Volt Gen5X Flood Light with Detachable Light
R8694620B
NO FURTHER DISCOUNTS
- Detachable 180° swiveling light cradle-holds the light in place while directing the light where its needed
- Extended run-time-up to 20 hours of continuous runtime with 5.0Ah
- Up to 1,200-Lumens with variable power dial-powerful output with adjustable lumen level to match brightness to the job
- Compact profile-designed for easy transportation and storage
- Variety of hanging options-for ultimate versatility on the jobsite
- On-board 1/4-20 thread-easily mount the unit to the RIDGID universal tripod
- Dime screw slot-to easily tighten and lock flood light into place
- Temperature control electronics-protects LED from overheating
$59.99
-
Certified Pre-Owned
RYOBI ONE+ 18 Volt 16 Gauge Finish Nailer
ZRP325
- AirStrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose
- Selectable drive switch with single sequential or contact actuation mode
- Convenient adjustment lever regulates air pressure for optimum results
- Tool-less depth-of-drive adjustment helps protect work surface and allows proper setting of nail heads
- Belt hooks mounts to right or left side for added convenience
- Grip-light technology engages LED by grasping the tool handle
- Tool-less jam release for easy removal of nails
- Low nail indicator to quickly and easily see when it is time to re-load
- 2 non-marring pads to keep work surface free of tool marks
- Dry-fire lockout feature extends tool life
- For use with 16GA finish nails
- Drives ¾ to 2-1/2 finish nails
$149.99
-
Factory Blemished
RYOBI ONE+ 18 Volt Compact Blower
P755
NO FURTHER DISCOUNTS
- Maximum air speed up to 160 MPH
- Compact and lightweight
- 3-speed settings
- Variable speed trigger
- Integrated rubber nozzle helps protect surfaces
$49.99
-
New
RYOBI Detail Sander Paper 5 Pack
A38DS10
- Compatible Models: Ryobi DS11008 Detail Sander Ryobi DS1200 0.4 AMP 2-7/8 in Detail Sander
$2.49
-
Factory Blemished
RYOBI ONE+ 18 Volt AirStrike 16-Gauge Straight Finish Nailer
P325
NO FURTHER DISCOUNTS
- AirStrike technology provides cordless convenience, eliminating the need for a compressor and bulky air hose
- Selectable drive shift with single sequential or contact actuation
- Tool-less depth-of-drive adjustment helps protect work surface and allows proper setting of finish nails
- Single sequential mode for precision placement
- Convenient adjustment dial regulates air pressure for optimum results
- Dry-fire lockout feature extends tool life
- Low nail indicator to quickly and easily see when it is time to re-load
- 2 non-marring pads to keep work surface free of tool marks
$179.99
-
Factory Blemished
RYOBI ONE+ 18 Volt JobPlus Base with Multi-Tool Head Attachment
P340
NO FURTHER DISCOUNTS
- Compact tool head fits into tight spaces and delivers 20,000 OPM no-load speed
- LED light brightens work area
- Multiple-position tool head adds handling versatility
- Universal adapter stores onboard and makes this tool compatible with other popular multi-tool accessories
- Ergonomic GripZone overmold offers maximum comfort and less fatigue
- MagTray magnetic holder allows convenient placement of screws and bits
- Battery and Charger Sold Separately
$69.99
-
Factory Blemished
RIDGID 5.5 Amp Corded Compact Router
R24012
NO FURTHER DISCOUNTS
- LED light to illuminate your work area for improved visibility
- Clear round and square bases for added versatility and convenience
- Quick-release lever for easy removal of the motor housing from the base
- Spindle lock for easy bit changes
- No mar flat top, the router sits upside down for easier bit changes
- Hex grip micro texture for a secure grip and maximum user comfort
- Dust shield to control where the dust needs to go
$79.99
-
Factory Blemished
RYOBI ONE+ 18 Volt 4-1/2 In. Brushless Angle Grinder
P423
NO FURTHER DISCOUNTS
- Brushless motor provides longer runtime, more power and longer motor life
- Compatible with lithium plus HP batteries for even more performance
- Versatile design is perfect for cutting or grinding applications
- Lock-on switch to maximize user control and convenience
- Compact design for user control and maneuverability
- Gripzone over mold with micro-texture for optimum grip and user comfort
- 3-position side handle for optimum hand placement
- On-board storage for spanner wrench
- Spindle lock for quick easy wheel change
- Ergonomic design for user comfort during prolonged use
$99.99
-
New
RYOBI #10 Wood Biscuits 125 Piece Set
A05WB11
- Fits slots cut by all standard plate joiners offering solid fit and strength
- Swells when contact is made with water-based glues for reinforcing wood joints
- Made of FSC wood from well managed forest
- For use with all plate joiners
- 125 pieces, #10 wood biscuits; Size 25/32 in. x 2-3/64 in.
$4.99
-
Factory Blemished
RYOBI 10 Amp 2 HP Plunge Base Router
RE180PL1G
NO FURTHER DISCOUNTS
- 2 HP, 10 Amp variable-speed motor for versatility
- ACCU-STOP micro-adjustable depth stop makes it simple to set and adjust for repetitive plunge cuts up to 2 in.
- Ergonomically designed handles for comfortable use at every angle
- 1/2 in. collect and 1/4 in. adaptor accept a variety of bits
- Soft start electronic variable speed adjusts from 15,000 - 25,000 RPM
- Spindle lock for easy one wrench bit change
$69.48
-
Certified Pre-Owned
RYOBI ONE+ 18 Volt Speed Saw Rotary Cutter
ZRP531
- 30% more compact design enhances user comfort while cutting (compared to previous model)
- 27,000 RPM for precision cuts
- Accepts 1/8 in. and 1/4 in. bits for a variety of cutting applications
- Tool less depth setting for fast and easy adjustments for making cuts in a variety of materials
- Spindle lock for easy 1-wrench bit changes
- GRIPZONE overmold for optimum grip and user comfort
- Battery and charger sold separately
$29.99
Added to Your Shopping Cart
Product Availability by Store Location
Hours